A 6m long back wall with end tower on a 3m deep exhibition show floor area with 3 open sides.

6m back wall with tower, exhibition gantries.

1.5M Straight Horizontal


1M Straight Horizontal


2M Leg


2M Straight Horizontal


2 Way 90 Degree 25

3 Way Corner Left 34

3 Way Corner Right 33

50 cm Straight Vertical

.75M Straight Horizontal


Alanna standing

D Eng Graphique

GL100

Graphic 3x3M

Horizontal "T" 36

Jan standing with coat

An ariel truss lighting rig in system 35 Trio.

Ariel light truss SYS35 Trio

Two straight pop up display stand s linked by connecting one D-end panel as a flying panel, over too the other display system. No additional graphic panels required if designed cleverly.

Linking straight popup stands

Printed gazebos are ideal for outdoor events, fairs, fetes and trade shows to promote your business and its products to the public.

Printed gazebos for outdoor events.

A very basic exhibition gantry stand, 3m x 2m x 2.5m high. The starting point for many lighting gantry systems.

3 x 2m Exhibition Gantry System

Trio lighting gantry, three legged structure, 3m x 4m x 3m high, a 3 sided wall as a background screen with along the ground to frame the banners.

System 35 trio truss 3m x 4m x 3m high with apertures banners

En eyecatching angular tower with aperture arms suited as a center piece for larger island exhibition floor areas.

Lighting truss angular tower with aperture wings.

Pop up room made from three 3x3 curved pop up displays

POP up room 4 x 4 metres

A 6m x 2m shell scheme booth with a lighting truss system used to carry a projector system.

6m x 2m shell scheme with trussing

Centro display boards are good for creating Straight or curved wall at exhibitions and events. Define your floor area with centro display boards.

Centro trade show back wall display boards.

System 35 Trio gantry stand with front curved hangover add literature racks  banner stands counters and a straight pop up display

6x6 metre exhibition stand

Trio lighting gantry, four legged structure, 3m x 3m x 2.5m high a basic starting point for trussing structures

sys35trio truss system 3m sq x 2.5m high perimeter truss system

Trio lighting gantry, four legged structure, 4m x 3m x 2.5m high a good starting point for developing truss structures.

Truss system 4m x 3m x 2.5m high truss system

Trio lighting gantry, bring an eye catching angular look to a basic exhibition back wall design. Complete with LCD screen and large format banner

System 35 trio back wall with angular side front projections

A 1.5m x 1.5m 4m high lighting truss tower, a central statement structure for any event or exhibition that is an island floor area.

Light gantry tower display in system 35 trio

This lighting truss ssytem demonstrates the use of curves and A single large back wall banner, lots of open floor for your product ranges.

7.5m by 4.6m Exhibition stand

A elongated aerial lighting truss in System 35 Trio, a little different to the standard circle so often seen.

Aerial lighting truss - elongated circle

Curved 3x3 popup display stands in a circular formation.

3x3 curved popup displays in circular formation

An eye catching truss system for exhibitions, a smart arcing front over hang.

Truss system with arcing front over hang

This 3m x 2m floor area shows cable displays  for display of posters and leaflets.

3m x 2m event floor area with cable displays

An race event start and finish line in Trio system 35 gantry, dressed with mesh banners.