Trio lighting gantry, four legged structure, 4m x 3m x 2.5m high a good starting point for developing truss structures.

Truss system 4m x 3m x 2.5m high truss system

1M Straight Horizontal


2M Leg


2M Straight Horizontal


3 Way Corner Left 34

3 Way Corner Right 33

D Eng Graphique

GL100

Graphic 3x3M

Shelly standing

Trio lighting gantry, 5m x 3m x 2.5m high, an exhibition floor area open front stretch of lighting truss can transform a stand.

Exhibition gantry 5m x3m backwall display

Thisexhibition gantry stand, demonstrating the use of curves and a single large back wall banner, lots of open floor for your product ranges.

7.5m x 4.6m exhibition gantry stand

A simple tube and drape back drop for presentations

An event start line in Trio system 35 gantry, dressed with mesh banners.
+ side livery banners

SYS35 Trio racing start line

A 6m long back wall with end tower on a 3m deep exhibition show floor area with 3 open sides.

6m back wall with tower, exhibition gantries.

This two teir lighting truss ssytem demonstrates the use of curves to make banner displays.

2 teir curved exhibition stand

Four 1.5m x 1.5m 4m high lighting truss tower, a powerful statement for any event.

Four light gantry towers.

Trio lighting gantry, three legged structure, 3m x 4m x 3m high, a 3 sided wall as a background screen with along the ground to frame the banners.

System 35 trio truss 3m x 4m x 3m high with apertures banners

Trio lighting gantry, four legged structure, 8m x 6m x 3.5m high a popular floor size for larger trade shows.

sys35trio truss system 8m x 6m x 3.5m high truss system

This two teir lighting truss system demonstrates the use of curves to make banner displays.

2 teir curved lighting truss system

A 6m x 2m shell scheme booth with a lighting truss system used to carry a projector system.

6m x 2m shell scheme with trussing

Trio lighting gantry, six legged structure, with centeral mid beam.

Sys35 trio lighting truss system

System 35 trio exhibition gantry system, open front wings with two tier center structure, 9.5m x 4m x 3.6m high. Shown with some liveried panel counters

Exhibition  stand 9.5m x 4m x 3.6m high

System 35 Trio gantry stand with front curved hangover add literature racks  banner stands counters and a straight pop up display

6x6 metre exhibition stand

This 3m x 2m floor area shows cable displays  for display of posters and leaflets.

3m x 2m event floor area with cable displays

Corner display stand open on 2 sides with curved corner shown on a 6x6M floor area with banners and a reverse curved pop up display.

Curved Corner stand

A very simple and easy to put together exhibition display. Banner stands are still a popular way to line out a booth.

Shell scheme with banner stands

2 tier exhibition gantry system, a raised front up stand to display a promotional banner.

2 tier front upstand - exhibition ganty

This lighting truss system demonstrates the use of curves to bring a softer look to a standard perimeter truss design, lots of open floor area.

7m x 7m exhibition stand floor area

This lighting truss ssytem demonstrates the use of curves and A single large back wall banner, lots of open floor for your product ranges.