2 tier exhibition gantry system, a raised front up stand to display a promotional banner.

2 tier front upstand - exhibition ganty

15.3cm Straight Vertical

1M Straight Horizontal


2M Leg


2M Leg with Left Corner

2M Leg with Right Corner

2M Straight Horizontal


Alanna standing

D Eng Graphique

GL100

Graphic 3x3M

Top Graphic 750mm x 3M

Two Tier Top Corner Left 1 Way 50cm

Two Tier Top Corner Right 1 Way 50cm

Trio lighting gantry, wall fixed 2 legged structure, 4m x 1m x 2.5m high
A small stand built to impress and expand.

Expo stand open 3 sides 4x1M

Trio lighting gantry, four legged structure, 3m x 3m x 2.5m high a basic starting point for trussing structures

sys35trio truss system 3m sq x 2.5m high perimeter truss system

3m x 3m shell scheme floor area

An eye catching truss system for exhibitions, a smart arcing front over hang.

Truss system with arcing front over hang

Trio lighting gantry, three legged structure, 3m x 4m x 2.5m high a basic starting point for many trussing structures, a 2 side wall as a background screen.

System 35 trio truss 3m x 4m x 2.5m high back and side wall

Trio lighting gantry, four legged structure, 4m x 4m with up and over banner display area. truss system 4m sq with middle up and over display area. (Open on 3 sides)

4 Metre square exhibition stand

This two teir curved lighting truss system show the use of curves to make a banner display area.

2 teir curved corner exhibition stand

1.5m radius arcs supported on a 4 legged system 35 lighting gantry.

Sys35Trio legg supported circle, 1.5m arcs

A 1.5m x 1.5m 4m high lighting truss tower, a central statement structure for any event or exhibition that is an island floor area.

Light gantry tower display in system 35 trio

Lighting truss system 35 used to display at the boat show this stand is 10x5 Metres, Coker Expo has a range of lighting for truss systems

Boat stand 10 x 5 Metres

Trio lighting gantry, a popular and easy setup backwall or divider. The portal or goal post structure is self-support on our extra-large base plates.

System 35 trio portal or goal post design

A very simple and easy to put together exhibition display. Banner stands are still a popular way to line out a booth.

Shell scheme with banner stands

Corner display stand open on 2 sides with curved corner shown on a 6x6M floor area with banners and a reverse curved pop up display.

Curved Corner stand

An lighting truss system has been used to spread light across the exhibit floor area. Bring the best out of products placed upon exhibition plinths, pedestals and podiums at trade show events.

exhibition plinths, pedestals and podiums.

Trio system 35 2 teir lighting gantry, with mid beam and ceneral down leg.

8m x 5m - 2 tier stand 4m high with three leg centre

Trio lighting gantry, four legged structure, 4m x 3m x 2.5m high a good starting point for developing truss structures.

Truss system 4m x 3m x 2.5m high truss system

This lighting gantry stand demonstrates the use of curves and pop up displays together, you can use this plan or edit as you wish

10 x 6 Metres Exhibition stand

This lighting truss ssytem demonstrates the use of curves and A single large back wall banner, lots of open floor for your product ranges.

7.5m by 4.6m Exhibition stand

Curved 3x3 popup display stands in a circular formation.

3x3 curved popup displays in circular formation

Trio lighting gantry, 5m x 3m x 2.5m high, an exhibition floor area open front stretch of lighting truss can transform a stand.